Three, automobile fuel saving tips
0000-00-00 00:00:00
1, as recommended by car maintenance and maintenance manual. A car maintenance maintenance good car opened up to more fuel-efficient, dirty spark plugs, air filter dirty or clogged filter will reduce fuel economy.
2 let the tire pressure remain appropriate.. If the tire pressure is too low will cost oil, so often check tire pressure. Comply with the provisions of the tire pressure can lower fuel consumption by 3.3 percentage points.
3 to your vehicle burden. Heavy vehicles will be more costly when driving.. So don't try to empty the trunk, the trunk when the storage room, the necessary things don't piled up in the car. If the luggage or the ski rack is not used, remove the.
4 don't drive too fast.. After the parking fierce stepped on the accelerator, and slam the brakes and the rush to speed these acts will increase fuel consumption.
5 as high as possible.. Low block traffic will consume more energy, so to drive a manual transmission speed to stabilize in the future should timely change into high gear, while driving the car automatic transmission should be avoided when using the & ldquo; sports & rdquo; model.
6 the use of cruise control. Select the cruise control can play a more fuel-efficient on a flat surface, but in the steep terrain of this law is not the most economical approach.
7 keep your vehicle clean.. Regular washing and waxing the car can reduce the air resistance, which can improve fuel economy.
8 to avoid long idling vehicles. When the vehicle engine is idling consumes fuel. If possible, try to turn the engine off while you are parking to turn the engine off and don't let it go..
9 as little as possible air conditioning. Air conditioning can consume a lot of fuel. Open windows on both sides can reduce the air resistance, so in the face of slow moving traffic jam windows should be, and in high speed air conditioning.
10 warm machine then accelerate. The engine is running at low temperature after running for more fuel, so don't speed up the engine immediately after starting the engine, and then slow the engine to get the engine hot and then accelerate..