Two, air-conditioning energy saving small common sense
0000-00-00 00:00:00
1 air conditioning purchase. The choose and buy when the air conditioning to consider the room size, an air-conditioning for about 12 M2 room, 1.5 air-conditioning for about 18 square meters room, 2 air-conditioning for about 28 square meters room, 2.5 air-conditioning for 40m2 around the room. Long time to use air-conditioning family should try to choose inverter air conditioner.
2 selective cooling power conditioning. A lack of refrigeration power of air conditioning, not only can not provide sufficient cooling effect, and due to the long, uninterrupted operation, have also reduced the air conditioning service life, increasing air-conditioning is generated using the possibility of fault. If air conditioning refrigeration power is too large, it will make the air conditioning thermostat too frequently switch, which leads on the air conditioning compressor wear increase; at the same time, also can cause the increase of the power consumption of the air conditioners.
3 improved room maintenance structure. For some room door and window structure and poor, gap larger, do some improve acute: as with glue tape sealed window sewing, and outside the window glass paste a layer of transparent plastic film, the sunshade curtain, interior walls attached to wooden plate or a plastic plate, brushing the wall white coated material in, to reduce the air consumption brought about through the walls.
4 open air conditioning to close the doors and windows. Air conditioning room not to open the door frequently to reduce the hot air infiltration. Also the function of ventilation air conditioning and air conditioner, in the indoor odor, fresh air ventilation door, so you can save 5% to 8% of energy.
5 air conditioning temperature setting is appropriate. Do not blindly seeking the low temperature of air-conditioning, air-conditioning temperature can be set properly, because air conditioning in the refrigeration, set the temperature 2, can save energy 20%. For meditation or ongoing light labor of people, indoor acceptable temperature general between 27 degrees to 28 DEG C, so this time, we can set the air conditioner for sleep profile, and it can save electricity.
position adjustment for the wind plate is set to horizontal direction.. The position of the guide plate is adjusted to the horizontal direction, and the cooling effect is better.
7 section piping should be and don't bend. Air conditioning piping connecting the indoor machine and an outdoor machine is short and does not bend, the cooling effect is good and not waste electricity. Even if not must bend it, keep the piping in a horizontal position.
8 filter net to wash.. Too much dust will plug the mesh, the double air conditioning electricity. Therefore, the filter should be cleaned regularly, generally 2 to 3 weeks cleaning.
9 off air conditioning.. Ten minutes before the home, that is, the air conditioning.
10 outlet to keep smooth.. Do not stack bulky furniture block cooling, increasing the senseless power consumption.
11 reduce the installation height of indoor unit.. Reduce the installation height of the indoor unit. The reason is very simple, cold air fall, so always in the lower part of the room, air-conditioning installation, the lower the need to refrigeration space, the more energy saving.